Voyager L4-153 2.5L SOHC Turbo (1989)
Shift Linkage: Adjustments
Fig. 4 Lock pin replacement
1.
Remove lock pin from transaxle selector shaft housing.
2.
Reverse lock pin so long end is facing downward, then insert lock pin into same threaded hole while pushing selector shaft into selector housing.
Fig. 5 Gear shift linkage
3.
Remove gearshift knob, retaining nut and pull-up ring.
4.
Remove boot assembly from console, then the console.
Fig. 6 Cable adjusting pins
5.
Fabricate two cable adjusting pins as shown.