Voyager L4-156 2.6L SOHC (1984)
2. Loosen cable housing retainers at the rail bracket and parking brake pedal assembly.
3. Lift floor mat for access to floor pan and force seal out of hole.
4. Pull cable end forward and disconnect from clevis.
5. Pull cable assembly through hole.
INSTALLING PARKING BRAKE FRONT CABLE
Parking Brake Pedal
1. Feed cable assembly through hole in floor and attach to brake pedal assembly.
2. Engage cable end in lever clevis.
3. Install floor pan seal and floor mat.
4. Feed cable assembly through rail bracket and fasten with retainer.
5. Engage cable end into connector on intermediate cable assembly.
6. Adjust service and parking brakes.