Voyager L4-156 2.6L SOHC (1984)
Evaporative Emissions Hose: Customer Interest
Emission Test - 2,500Rpm High CO Reading
Models
1984-1987 S-Body Vehicles Equipped With 2.6L Federal Emissions
Subject
High "CO" at 2500 RPM Emission Test
Index
EMISSIONS
Date
September 19, 1988
No.
25-04-88
P-3909 (C25-04)
SYMPTOM/CONDITION
Failure of state I/M (2500 rpm) "CO" emission test at sea level.
DIAGNOSIS
This emission package should only be used on vehicles with proof of I/M failure during the 2500 rpm test.
PARTS REQUIRED
Emission Package PN 4419453
Contains the following components:
1
5" Vacuum Reducer
PN 4095139
1
Vacuum Bleed-Off Valve
PN 4104184
1
Vacuum Delay Valve
PN 4324334
1
Vacuum Tee
PN 3671410
2
Tie Wraps
PN 6015756
1
Authorized Modification Label
PN 4275086
REPAIR PROCEDURE
This repair involves installing a vacuum reducer, bleed-off valve, and vacuum delay valve in the vacuum signal to canister purge line.
1.
Cut three pieces of 3/16" diameter vacuum hose, PN 4105167 (serviced in bulk), in the following lengths. Two 2" lengths and one 28" length.