Voyager L4-156 2.6L SOHC (1984)
FIGURE 3
3.
Inspect for an EGR bleed delay valve. If equipped with a delay valve, make sure the valve installed is PN 4324017. If no valve is installed, install
PN 4324017 as shown in Figure 3 (dark side toward nipple).
4.
Remove carburetor per the service manual procedure and install the new carburetor, PN MD109526, using a new base gasket, PN MD025434, per
the service manual procedure.
FIGURE 4
5.
Type information on the Authorized Modification Label, PN 4275086, as shown in Figure 4.
6.
Apply Authorized Modification Label near or next to VECI label.
POLICY:
Reimbursable within the provisions of the warranty
TIME ALLOWANCE:
Labor Operation No.
14-70-17-95
0.9 Hrs.
FAILURE CODE:
AM - Authorized Modification