Voyager L4-2.4L VIN B (1997)
vacuum gauge.
-
Heavy gloves should be worn.
CAUTION: Do not cover the tailpipe opening for an extended period of time as damage to components or overheating may result.
17. As temporary back-pressure is built, full manifold vacuum should be observed at the vacuum outlet fitting.
-
Without back-pressure, and engine at approximately 2,000 rpm, the gauge reading will be low.
-
This low reading is normal.
-
At idle speed, the gauge reading will be erratic.
-
This is also normal.
18. If full manifold vacuum is not present at the outlet fitting, but was present at the inlet fitting, replace the valve.
NOTE: The EGR valve, valve control and attaching hoses are serviced as one assembly.