Voyager L4-2.4L VIN B (1997)
Ignition Coil: Service and Repair
Fig 7 Ignition Coil Removal
REMOVAL
1. Remove spark plug cables from coil (Fig. 7).
-
Always twist the coil boots to break the seal with the coil and pull straight back on the boot.
2. Remove ignition coil electrical connector.
3. Remove ignition coil mounting bolts, throttle cable bracket or clip.
4. Remove ignition coil.
INSTALLATION
1. Reverse the above procedure for installation.
-
Tighten mounting screws to 12 Nm (105 in lb) torque.
2. Transfer ignition cables to new coil pack.
-
The coil pack towers and cables are numbered with cylinder identification.