Voyager L4-2.4L VIN B (1997)
Turn Signal Switch: Testing and Inspection
Turn Signal/Multi-Function Switch
Turn Signal - Multi-Function Switch Pin Numbers
To test turn signal, headlamp beam select and optical horn portion of the multi-function switch:
1. Remove the multi-function switch, refer to removal procedures.
2. Using an ohmmeter check continuity reading between multi-function switch pins are as described below.
Switch Position
Continuity Between
Left
4 and 8
Right
3 and 8
Hazard
1 and 8
LO Beam
9 and 10
HI Beam
9 and 12