Voyager L4-2.4L VIN B (1997)
5. Install coil spring onto strut. Spring is to be installed with the end of the bottom coil aligned with the clevis bracket on the strut assembly.
6. Install the upper spring seat on the coil spring. Spring seat must be installed with the notch in the spring seat aligned with the clevis bracket on the
strut assembly.
7. Compress strut assembly coil spring, using Professional Service Spring Compressor; GP-2020-S2.5 or an equivalent. Use the A60 top shoe to grab
upper spring seat and A40 bottom shoe to grab coil spring.
8. Install the strut assembly pivot bearing on the top of the upper spring seat. Bearing must be installed on spring seat with the smaller diameter side of
the pivot bearing toward the spring seat. Also, be sure the pivot bearing is sitting flat on the spring seat.
9. Install the strut mount on the upper spring seat of the strut assembly. Then loosely install the nut on strut shaft.
WARNING: The following 2 steps must be completely done before spring compressor is released from the coil spring.
