Voyager L4-2.4L VIN B (1997)
-
Place crimping tool C-4975-A, or equivalent over bridge of clamp.
-
Tighten nut on crimping tool C-4975-A, or equivalent until jaws on tool are closed completely together, face to face.
Latching Type Boot Clamp
If seal boot uses low profile latching type boot clamp:
-
Clamp sealing boot onto tripod housing using clamp locking tool, Snap-On YA3050, or an equivalent.
-
Place prongs of clamp locking tool in the holes of the clamp.
