Voyager V6-181 3.0L SOHC (1988)
Sliding Door Handle: Adjustments
Four areas of the latch remote locking control can be adjusted: the lock knob, inside handle, outside handle, and the front hook. These components
should be adjusted when they fail to operate properly.
Latch Remote Locking Control
To simplify service of the sliding door latches and locks, a latch remote locking control is used. This assembly consolidates the door locks and latch
remote control mechanisms into one unit. It can be accessed for removal and replacement by removing the door trim panel.
Adjusting The Lock Knob
Perform the lock knob adjustment with the door open. Loosen the lowermost allen head screw on the control assembly. Then lock the latch by pulling the
locking link forward and tighten the allen head screw to 25 in. lbs. (3 Nm).
