Voyager V6-181 3.0L SOHC (1988)
Power Door Lock Actuator: Service and Repair
Sliding Door
REMOVAL
Sliding Door Power Lock Components
1.
Remove door trim panel. See: Doors, Hood and Trunk/Doors/Sliding Door/Sliding Door Interior Trim Panel/Service and Repair
2.
Remove eight (8) control assembly to door mounting bolts.
3.
Disconnect the lock linkage and the wiring harness.
4.
Pull the control assembly out of the sliding door.
5.
Disconnect the lock linkage from the lock motor and remove the lock motor from the control assembly.