Voyager V6-181 3.0L SOHC (1988)
6.
Using the jumper harness supplied, connect the map sensor to the wiring harness connector. Route and tie-wrap as shown in the illustrations.
On the C-body the jumper harness is to be secured with tie-wraps to the underhood wiring harness and the right motor mount.
On the S-body the jumper harness is to be secured with tie-wraps to the alternator and the original map sensor bracket.
7.
Type "This Vehicle Has Been Modified With Relocation of the Map Sensor" on the Authorized Modification Label (PN 4275086) and place near
the existing VECI label.
POLICY:
Reimbursable within the provisions of the warranty
TIME ALLOWANCE:
Labor Operation No.
08-14-15-91 . . . . . . . . . . .
0.3 Hrs.
FAILURE CODE:
51 - Improperly Installed
