plymouth Workshop Repair Guides

Plymouth Workshop Service and Repair Manuals

ABOUT US
A/T - Whine At 35-50 MPH|Page 3069 > < A/T - Whine At 35-50 MPH|Page 3067

Voyager V6-181 3.0L SOHC (1988)

Page 4
background image

3. Install knuckle assembly on ball joint stud, then clamp bolt. Tighten bolt to 70 ft lbs. Steering knuckle clamp bolt is prevailing torque type.

Original, or equivalent bolt must be installed during assembly.

4. Install speedometer pinion, right driveshaft only.

A/T - Whine At 35-50 MPH|Page 3069 > < A/T - Whine At 35-50 MPH|Page 3067