Voyager V6-201 3.3L VIN R SMFI (1997)
Left Quarter Trim Bolster SWB and LWB 3 Door
INSTALLATION
1. Place quarter trim bolster in position on vehicle.
2. Engage hook retainer to hold front of trim bolster to quarter trim panel, if applicable.
3. Engage hidden clips to hold trim bolster to quarter trim panel.
Right D-Pillar Trim Panel
RIGHT D-PILLAR TRIM PANEL
REMOVAL
1. Remove rear header trim cover.
2. Remove liftgate Sill plate.
3. Remove second rear seat belt turning loop on long wheel base vehicle.
4. Remove bolt holding second rear seat belt, if equipped, anchor to quarter on short wheel base vehicle.
5. Remove quarter trim bolster on short wheel base vehicle.
6. Remove screws holding trim panel to attaching bracket on short wheel base vehicle.
7. Disengage hidden clips holding trim to D-pillar.
8. Separate D-pillar trim panel from D-pillar.
9. Disengage speaker wire connector, if equipped.
10. Pass second rear seat belt, if equipped, through slot in trim panel on short wheel base vehicle.
