plymouth Workshop Repair Guides

Plymouth Workshop Service and Repair Manuals

Braking Sensor/Switch > < Diagram Information and Instructions|Page 6062
Page 1
background image

Brake Fluid Pump: Description and Operation

Integrated Control Unit (ICU)

GENERAL INFORMATION

The Hydraulic Control Unit (HCU) contains 2 pump assemblies, one for the primary and one for the secondary hydraulic circuit of the brake
system. Both pumps are driven by a common electric motor which is part of the HCU. The pumps draw brake fluid from the fluid accumulators to
supply build pressure to the brakes during an ABS stop. The pump motor runs during an ABS stop and is controlled by the Controller Antilock
Brake (CAB). The pump/motor assembly is not a serviceable item. If the pump/motor requires replacement, the complete HCU (minus the CAB)
must be replaced.

NOTE:  The pump is an integrated component of the HCU.

Braking Sensor/Switch > < Diagram Information and Instructions|Page 6062