Voyager V6-201 3.3L VIN R SMFI (1997)
8. Remove the hub/bearing assembly from the rear axle and brake support plate.
9. Using a suitable tool such as a 14 mm box wrench or an aircraft type hose clamp, compress the flared legs on park brake cable retainer. Then pull
the parking brake cable out of brake support plate.
10. Lower vehicle enough to access the brake pedal.
11. Using a brake pedal depressor, move brake pedal to a position past its first 1 inch of travel. This will prevent brake fluid from draining out of
master cylinder when brake tube is remove from wheel cylinder.
12. Raise Vehicle.