Voyager V6-201 3.3L VIN R SMFI (1997)
Brake Tube Connections To HCU
7. Remove the 6 brake tubes from the inlet and outlet ports on the HCU.
HCU To Suspension Cradle Mounting Bolts
8. Remove the 3 bolts attaching the HCU mounting bracket to the front suspension crossmember.
9. Remove HCU and the mounting bracket as a unit from the vehicle.
HCU Mounting Bolts
10. Remove the 3 bolts mounting the HCU to the mounting bracket. Separate the HCU from the mounting bracket.
11. Remove the CAB from the bottom of the HCU for installation on the replacement HCU. See: Antilock Brakes / Traction Control
Systems/Electronic Brake Control Module/Service and Repair
