Voyager V6-201 3.3L VIN R SMFI (1997)
tighten both bolts to a torque of 25 Nm (18 ft. lbs.) Install the clip attaching the wiring harness to the throttle cable bracket..
Electrical And Vacuum Connections To Throttle Body
14. Install the wiring harness connectors on the throttle position sensor and the AIS motor on throttle body.
Electrical Connector At EGR Transducer
15. Install the wiring harness connector on the EGR valve transducer.
Battery Tray Mounting Locations
16. Install the battery tray in the vehicle. Install the 2 bolts and the nut attaching the battery tray to the vehicle. Tighten the 2 bolts and the nut to a
