Voyager V6-201 3.3L VIN R SMFI (1997)
throttle blade and portions of the throttle bore that are closest to the throttle blade when closed, must be free of deposits.
d. Use compressed air to dry the throttle body.
e. Inspect throttle body for foreign material.
f.
Install throttle body on manifold.
g. Repeat steps 1 through 12. If the minimum air flow is still not within specifications, the problem is not caused by the throttle body.
15. Shut off engine.
16. Remove Air Metering Fitting 6457 from the intake manifold PCV nipple. Reinstall the PCV valve hose.
17. Uncap the throttle body idle purge nipple and connect the idle purge line.
18. Remove DRB scan tool.
