Voyager V6-201 3.3L VIN R SMFI (1997)
22. Remove the bolts holding the lower supports to the floor pan.
23. Remove the right and left end covers.
24. Disconnect the wire connectors from the Passenger Airbag Module.
25. Remove the front door sill trim covers.
26. Remove the A-pillar trim covers. Refer to: "Body and Frame : Interior Trim : Trim Panel : Service and Repair" See: Body and
Frame/Interior Moulding / Trim/Trim Panel/Service and Repair
27. Remove the glove box.
28. Disconnect the antenna lead connector from behind the glove box.
29. Remove the lower steering column cover.
30. Remove the knee blocker panel. Refer to: "Body and Frame : Interior Trim : Dashboard / Instrument Panel : Service and Repair".See:
Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair
Body Control Module Connectors
31. Disconnect the lower two, forty pin wire harness connectors, from the main Junction Block near left cowl side panel.
32. Disconnect the instrument panel wire harness connector from the bottom of Body Control Module.
40 Way Connectors
