Voyager V6-201 3.3L VIN R SMFI (1997)
Glove Box Lamp Switch: Service and Repair
Glove Box Lamp And Switch
REMOVAL
1. Open glove box door.
2. Using a trim stick, lightly pry glove box lamp/ switch from instrument panel.
3. Disengage wire connector from glove box lamp and switch.
4. Remove glove box lamp and switch.
Glove Box Lamp
5. Remove lamp.
INSTALLATION
1. Install lamp.
2. Install glove box lamp and switch.
3. Engage wire connector from glove box lamp and switch.
4. Using a trim stick, lightly pry glove box lamp/ switch from instrument panel.
5. Close glove box door.
