Voyager V6-201 3.3L VIN R SMFI (1997)
Suspension Spring ( Coil / Leaf ): Service and Repair
Leaf Spring Bushing
1. Install leaf spring in a proper holding fixture.
2. Install leaf spring press Special Tool C-4212-F, or equivalent.
3. Install adapter Special Tool C-4212-3, or equivalent.
4. Tighten leaf spring press until bushing is extracted from leaf spring.
5. Remove leaf spring press from leaf spring.
6. Insert replacement bushing into the leaf spring eye. Verify that the bushing flange is on the outboard side of the leaf spring.
7. Install leaf spring press Special Tool C-4212-F, or equivalent.
8. Install adapter Special Tool C-4212-4, or equivalent.
9. Tighten leaf spring press until bushing flange bottoms solidly against leaf spring eye.
10. Remove leaf spring press and adapter.
