Voyager V6-201 3.3L VIN R SMFI (1997)
10. Remove the leaf spring from the vehicle.
11. Loosen and remove the pivot bolt from the front mount of the rear leaf spring.
Installation
1. Assemble front spring mount to front of spring eye and install pivot bolt and nut. Do not tighten.
CAUTION: Pivot bolt must face inboard to prevent structural damage during installation of spring.
2. Raise front of spring and install four hanger bolts, tighten to 61 Nm (45 ft. lbs.) torque.
3. Install rear of spring onto rear spring shackle. Install shackle plate. Do not tighten.
4. Verify lower leaf spring isolator is in position.
