Voyager V6-229 3.8L (1996)
Brake Master Cylinder: Service and Repair
Master Cylinder Bleeding
1. On models with anti-lock brakes, turn ignition switch to Off position, then pump brake pedal a minimum of 40 times to de-pressurize hydraulic
accumulator.
2. On all models, connect a suitable transparent hose to bleeder valve on right rear wheel cylinder and submerge other end in a glass container
partially filled with clean brake fluid.
3. Pump brake pedal several times, then hold pedal down firmly.
4. With pedal firmly depressed, open bleeder valve of right rear brake until pedal fades to floor, then close bleeder valve.
5. Repeat procedure until a continuous flow of brake fluid is released from bleeder valve. Ensure a fluid level is maintained in master cylinder at
all times.
6. Perform Steps 2 through 5 for left rear, right front, and left front brakes in that order.
7. After bleeding of brakes is completed, road test vehicle to ensure brakes are operating correctly and pedal is solid.
