Voyager V6-3.0L VIN 3 (1998)
Connecting Rod Bearing: Service and Repair
Connecting Rod Bearing Clearance
CONNECTING ROD CLEARANCE
Connecting Rod-Checking Bearing Clearance
1. Following procedures specified in the Standard Service Procedures Section for Measuring Main Bearing Clearance and Connecting Rod Bearing
Clearance. Refer to Connecting Rod Specification Chart.
2. Tighten nuts to 52 Nm (38 ft. lbs.).
3. Remove connecting rod cap and measure Plastigage.
CAUTION: Do not rotate crankshaft or the Plastigage may be smeared.
CONNECTING ROD SIDE CLEARANCE
Checking Connecting Rod Side Clearance
Using a feeler gauge, check connecting rod side clearance. Refer to Connecting Rod Specification Chart.
Connecting Rod Specification Chart
CONNECTING ROD SPECIFICATION CHART
