Voyager V6-3.0L VIN 3 (1998)
Headlamp Bulb: Service and Repair
Headlamp Bulb
REMOVAL
1. Release hood latch and open hood.
2. From behind radiator closure panel, disengage wire connector from back of headlamp bulb base.
3. Rotate headlamp bulb retaining ring counter clockwise.
4. Disengage retaining ring from headlamp.
5. Pull headlamp bulb from back of headlamp.
INSTALLATION
CAUTION: Do not touch the glass of halogen bulbs with fingers or other possibly oily surface, reduced bulb life will result.
1. From behind radiator closure panel, insert headlamp bulb into back of headlamp.
2. Engage retaining ring onto headlamp.
3. Rotate headlamp bulb retaining ring clockwise.
4. Engage wire connector into headlamp bulb base.
5. Verify headlamp alignment.
