Voyager V6-3.0L VIN 3 (1998)
GENERATOR AND POWER STEERING PUMP BELT
The Poly-V generator/power steering pump belt is provided with a dynamic tensioner to maintain proper belt tension. To remove or install this
belt, apply force in a clockwise direction to the tensioner pulley bolt.
AIR CONDITIONING BELT
Removal
To remove the air conditioning compressor drive belt, first loosen the idler pulley lock nut, then turn the adjusting screw to lower the idler pulley.
Installation/Adjustment
To adjust the air conditioning drive belt, loosen the idler pulley lock nut and adjust belt tension by tightening adjusting screw. Tighten pulley lock
nut to 54 Nm (40 ft. lbs.) after adjustment.
Alternator Belt
GENERATOR/POWER STEERING PUMP BELT REMOVAL/INSTALLATION
Release Belt Tensioner
