Voyager V6-3.0L VIN 3 (1998)
Throttle Cable/Linkage: Service and Repair
Fig 61 Throttle Cable To Throttle Body Attachment
CAUTION: When servicing the accelerator pedal, throttle cable or speed control cable, do not damage or kink the core wire inside the cable sheathing.
REMOVAL
1. Working from the engine compartment, hold the throttle body throttle lever in the wide open position.
2. Remove the throttle cable from the throttle body cam (Fig. 60), (Fig. 61) and (Fig. 62).
Fig 58 Accelerator Pedal And Throttle Cable -- Front View
3. From inside the vehicle, hold up the pedal and remove the cable retainer and throttle cable from the upper end of the pedal shaft (Fig. 58).
