Voyager V6-3.3L VIN G Flex Fuel (2000)
6. Loosen screws attaching regulator to inner door panel.
7. Remove regulator from inner door panel.
Fig. 18
8. Extract rear guide rail through inner door panel rear access hole (Fig. 18).
9. Extract front guide rail through front access hole.
INSTALLATION
1. Insert front guide rail through front access hole.
2. Insert rear guide rail through rear access hole.
3. Place window regulator in position on inner door panel.
4. Place screw heads on guide rails in position through key hole slots in inner door panel.
5. Tighten screws to attach front and rear guide rails to inner door panel.
6. Connect wire connector into power window motor, if equipped.
7. Install door glass.
8. Verify door glass alignment and operation.
9. Install sound shield and door trim panel.
