Voyager V6-3.3L VIN G Flex Fuel (2000)
11. Disconnect MAP Sensor electrical connection (Fig. 42).
12. Remove EGR tube flange from intake plenum.
13. Remove vacuum harness connectors from intake plenum (Fin 42).
Fig. 43
14. Remove cylinder head to intake plenum strut (Fig. 43).
15. Remove the engine mounted ground strap.
Fig. 44
16. Remove the fuel hose quick connect fitting from the fuel line by using an open end wrench pushing in on the plastic ring located on the end of the
fittings. Gently pull the fitting from the fuel line (Fig. 44).
WARNING: WRAP A SHOP TOWEL AROUND HOSES TO CATCH ANY GASOLINE SPILLAGE DURING REMOVAL.
