Voyager V6-3.3L VIN G Flex Fuel (2000)
3. Remove bolts attaching filter-drier to radiator module.
4. Remove upper radiator crossmember.
5. Tilt radiator rearward.
Upper Discharge Line
6. Remove upper discharge line at condenser.
7. Through fascia, remove lower liquid line from filter-drier.
8. Remove lower condenser mounting bolts.
9. Remove upper mounting bolts.
Condenser Removal
10. Remove condenser from vehicle.
INSTALLATION
NOTE: Inspect Cooling Module for presence of seals. Verify seals are available for re-installation.
1. Before installation, replace all O-rings and gaskets, coat all sealing surfaces with approved wax-free refrigerant oil. Then, reverse the above
procedures.
2. Torque the following components to specifications:
-
Liquid line at filter/drier - 45 in. lbs. ± 10.
-
Upper discharge line at condenser - 180 in. lbs. ± 20
-
Lower liquid line to condenser - 180 in. lbs. ± 20.
2. lower, condenser mounting bolts - 45 in. lbs. ± 10.