Voyager V6-3.3L VIN G Flex Fuel (2000)
Parking Light Bulb: Service and Repair
REMOVAL
1. From under front wheelhouse, remove access cover behind parking and turn signal lamp.
2. Through access hole in wheelhouse, rotate parking and turn signal socket counterclockwise one quarter turn.
Parking and Turn Signal Lamp Bulb
3. Pull socket from back of lamp.
4. Pull bulb from socket.
INSTALLATION
1. Align key on bulb base to groove in socket and insert bulb into socket.
2. Through access hole in wheelhouse, insert socket into back of lamp.
3. Rotate parking and turn signal socket clockwise one quarter turn.
4. Install access cover and verify lamp operation.