Voyager V6-3.3L VIN G Flex Fuel (2000)
10. Remove the 2 bolts and loosen the third attaching the antilock brakes Hydraulic Control Unit (HCU) to the front suspension cradle. Then rotate the
HCU rearward to allow access to the cradle plate attaching nut and bolt just forward of the HCU.
11. Remove the 10 nuts and bolts attaching the cradle plate to the bottom of the front suspension cradle. Then remove the cradle plate from the cradle.
12. If the vehicle is equipped with All-Wheel Drive, remove the power transfer unit. Refer to Transmission and Drivetrain.
