Voyager V6-3.3L VIN R (1999)
Brake Caliper: Service and Repair
Removal and Installation
Front
NOTE: Before proceeding with this procedure, review Service Precautions.
REMOVAL
1. Raise vehicle on jackstands or centered on a hoist.
2. Remove front wheel and tire assemblies.
3. Remove the two caliper to steering knuckle guide pin bolts.
Caliper Assembly Mounting On Steering Knuckle (Typical)
4. Remove caliper from steering knuckle by first rotating free end of caliper away from steering knuckle. Then slide opposite end of caliper out from
under machined abutment on steering knuckle.