Voyager V6-3.3L VIN R (1999)
Piston: Service and Repair
Fitting Pistons and Rings
FITTING PISTONS
Piston Measurements
Checking Cylinder Bore Size
The piston and cylinder wall must be clean and dry. Piston diameter should be measured 90 degrees to piston pin at size location. Cylinder bores
should be measured halfway down the cylinder bore and transverse to the engine crankshaft center line. Refer to Cylinder Bore and Piston
Specification Chart. Pistons and cylinder bores should be measured at normal room temperature, 70°F (21°).
