Voyager V6-3.3L VIN R (1999)
Drive Belt: Service and Repair
Removal and Installation
A/C Belt
Refer to Drive Belt, Alternator for procedure.
Alternator Belt
Accessory Drive Belt-3.3/3.8L Engines
The Poly-V serpentine drive belt is provided with a dynamic tensioner to maintain proper belt tension to drive the following components:
^
generator
^
power steering pump
^
air conditioning compressor
^
water pump
REMOVAL
1. Raise vehicle on hoist.
Accessory Drive Belt Splash Shield
2. Remove accessory drive belt splash shield.
WARNING: DO NOT ALLOW DRIVE BELT TENSIONER TO SNAP BACK, AS DAMAGE TO TENSIONER AND/OR PERSONAL
INJURY COULD RESULT.
3. Release belt tension by rotating the tensioner clockwise.
4. Remove drive belt.
INSTALLATION
1. Properly route and position belt onto all pulleys, except for the tensioner pulley.
2. Rotate belt tensioner clockwise until belt can be installed onto the tensioner pulley. Slowly release belt tensioner.
3. Verify belt is properly routed and engaged on all pulleys.
