Voyager V6-3.3L VIN R (1999)
17.
Remove the intake plenum mounting bolts and rotate the plenum back over the rear valve cover (Figure 14).
NOTE:
It is not necessary to completely remove the intake plenum from the vehicle.
18.
Cover the intake manifold openings.
19.
Remove the fuel rail attaching bolts (Figure 15).
20.
Disconnect the engine coolant temperature sensor and camshaft position sensor or coil pack electrical connectors (Figure 16).
21.
Disconnect the fuel rail wiring harness from the main engine harness.
22.
Remove the fuel rail assembly.
23.
Position the fuel rail on a clean bench or other suitable work surface so that the fuel injectors are easily accessible.
24.
Disconnect the injector wiring connectors from the fuel injectors and then remove the wiring harness from the fuel rail.
