plymouth Workshop Repair Guides

Plymouth Workshop Service and Repair Manuals

Starting System > < Electrical Specifications|Page 4455
Page 1
background image

Voltage Regulator: Description and Operation

DESCRIPTION

The Electronic Voltage Regulator (EVR) is not a separate component. It is actually a voltage regulating circuit located within the Powertrain
Control Module (PCM). The EVR is not serviced separately. If replacement is necessary, the PCM must be replaced.

OPERATION

The amount of DC current produced by the generator is controlled by EVR circuitry contained within the PCM. This circuitry is connected in
series with the generators second rotor field terminal and its ground.

Voltage is regulated by cycling the ground path to control the strength of the rotor magnetic field. The EVR circuitry monitors system line voltage
and battery temperature (refer to Battery Temperature Sensor for more information). It then compensates and regulates generator current output
accordingly Also refer to Charging System Operation for additional information.

Starting System > < Electrical Specifications|Page 4455