2000 Sunbird L4-121 2.0L VIN B 2-bbl (1984)
12.
Remove two (2) upper blower air inlet housing attaching screws.
13.
Using a flat blade tool, such as a screwdriver, pry top portion of blower air inlet housing approximately 1/4" from dash extension panel.
14.
Install baffle flange between dash extension panel and blower air inlet housing gasket. Baffle should be level and in full down position.
15.
Reinstall blower air inlet housing attaching screws, sealing strip, water deflector, shroud panel, and wiper arms.
Labor Operation Number:
T1145
Labor Time
: .7 hour
