6000 V6-173 2.8L VIN W FI (1986)
FIGURE 5
11.
Position and secure the fuel lines so that they do not touch.
12.
Raise and position fuel tank to vehicle underbody. Loosely attach straps to underbody placing two 7/16" flat washers, P/N 3899696, or equivalent
on each of the strap bolts between strap and under body attaching point (Figure 5).
FIGURE 6
13.
Insure fuel tank strap spacer located on L.H. strap is properly positioned under forward flange of tank (Figure 6). Torque L.H. strap bolt and then
R.H. bolt to 25 ft.lbs (34 N-m).
14.
Inspect to insure forward tank flange is not contacting strap body bracket, and that sender pipes are not in contact with either tank or underbody.
Correct as required.
15.
Reconnect fuel hoses and electrical connector following service manual procedure.
16.
Start vehicle, inspect for any fuel leakage and repair as necessary.
Parts required for this procedure are available from GMSPO and are noted below with the exception of the pump and sender part numbers, which are
found in the GMSPO Parts Catalog.
Part
Quantity
Application
Number
Description
Required
6000
22508205
Insulator
1
Bonneville
22530172
Insulator
1
Bonneville
22530290
Insulator
1
6000 and
Bonneville
25094266
Pulsator
1
