6000 V6-173 2.8L VIN Z 2-bbl HP (1984)
Parking Brake Cable: All Technical Service Bulletins
Park Brake - Equalizer Rattle
Number 87-5-5
Date
4/87
Subject:
PARK BRAKE EQUALIZER RATTLE
1982-87 6000 MODELS
PARK BRAKE EQUALIZER
Some vehicles may develop a rattle at the park brake equalizer located on the forward side of the rear axle. This rattle can be eliminated by the
installation of an insulator (see Illustration). To install the insulator, loosen the park brake adjuster until the front cable can be removed from the cable
connector (located at the end of the right hand cable).. Remove the front cable from the equalizer and install the insulator.
Reinstall the front cable and adjust the park brake per the Service Manual.
Insulator, P/N 10055178
Labor Operation Number:
T1209
Labor Time
: 0.6 Hours
