pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

Diverter/Electric Switching Valve - Noise|Page 2497 > < Diverter/Electric Switching Valve - Noise|Page 2491
Page 1
background image

Air Injection Control Valve: Customer Interest
Diverter/Electric Switching Valve - Noise

Number 84-6 (Gasoline)-50

Date 7/84

Subject:

NOISY PRESSURE OPERATED ELECTRIC DIVERTER/ELECTRIC SWITCHING (PEDES) VALVE-1984 BUICK
BUILT V-6 ENGINES

Figure 1

A popping noise may be emitted from the (PEDES) A..I.R. management valve. This noise may occur due to one of two possible causes. It may be caused
by a missing solenoid plug on the black converter solenoid, see illustration.

The other possible cause for noise is a missing "O" ring between the black solenoid and the air management valve, see illustration.

A new solenoid, Part Number 17110655, has been released for service to repair this condition. Included with this solenoid will be two (2) "O" rings.

Procedure for replacement of black solenoid on (PEDES) Valve.

PRESSURE OPERATED ELECTRIC DIVERT/ELECTRIC SWITCHING VALVE

A.

Disconnect electrical connector from black solenoid, see Figure 2.

Diverter/Electric Switching Valve - Noise|Page 2497 > < Diverter/Electric Switching Valve - Noise|Page 2491