Aztek V6-3.4L VIN E (2001)
Amplifier: Service and Repair
AMPLIFIER REPLACEMENT
REMOVAL PROCEDURE
1. Remove the left Instrument Panel (IP) insulator.
2. Push in the retaining tab to release the amplifier.
3. Slide the amplifier Out of the bracket.
4. Disconnect the electrical connectors.
5. Remove the amplifier from the vehicle.
INSTALLATION PROCEDURE
1. Connect the electrical connectors to the amplifier.
2. Align the pins on the amplifier to the slots on the bracket.
3. Slide the amplifier forward until the lock tab is seated.
4. Install the left IP insulator.
