Aztek V6-3.4L VIN E (2001)
1. Install the fascia outer support to the fascia.
2. Install the grilles. Refer to Fascia Grille Replacement (See: Fascia Grille Replacement).
3. Position the fascia to the vehicle.
4. Align the alignment pins of the fascia to the front fenders and moldings.
5. Install the push-in the retainers starting at the center, to the front upper bumper fascia support.
Notice: Refer to Fastener Notice in Cautions and Notices.
6. Install the bolts to the front fascia at the front fenders.
Tighten the front fascia bolts to 10 Nm (89 lb in).
Important: Push the retainer tabs up and against the front bumper energy absorber.
7. Install the push-in retainers to the fascia at the energy absorber.
8. Install the fog lamps. Refer to Front Fog Lamp Replacement in Lighting Systems.
9. Install the headlamps. Refer to Headlamp Assembly or Headlamp Bulb Replacement in Lighting Systems.
10. Install the front fender liners. Refer to Front Fender Liner Replacement (See: Fender/Front Fender/Front Fender Liner/Service and Repair) in
Body Front End.
