Aztek V6-3.4L VIN E (2001)
5. Remove the roofrail auxiliary weatherstrip push-in retainers from the rear pillar using J 38778.
6. Remove the roofrail auxiliary weatherstrip from the roof rail flange pulling from the rear to front.
Bending back the roofrail auxiliary weatherstrip onto itself to open the carrier while pulling forward will ease the removal effort.
INSTALLATION PROCEDURE
1. Position the roofrail auxiliary weatherstrip push-in retainer to the first hole in the upper rear corner.
2. Press in the push-in retainer until fully seated.
3. Install roofrail auxiliary weatherstrip onto the flange.
Bending back the roofrail auxiliary weatherstrip onto itself to open the carrier while pushing forward will ease the installation effort.
4. Install the remaining push-in retainers to the rear pillar.