Aztek V6-3.4L VIN E (2001)
1. Position the roofrail auxiliary weatherstrip push-in retainer to the first hole in the upper rear corner.
2. Press in the push-in retainer until fully seated.
3. Install roofrail auxiliary weatherstrip onto the flange.
Bending back the roofrail auxiliary weatherstrip onto itself to open the carrier while pushing forward will ease the installation effort.
4. Install the remaining push-in retainers to the rear pillar.
5. Install the center pillar auxiliary weatherstrip pressing in the push-in retainers until fully seated.
6. Align the C-pillar auxiliary weatherstrip top push-in retainers to the top hole in the rear pillar.
7. Install the C-pillar auxiliary weatherstrip working downward pressing in the remainder of the push-in retainers until fully seated.
8. Close the rear door.
Center Pillar Auxiliary Weatherstrip Replacement
Center Pillar Auxiliary Weatherstrip Replacement
Removal Procedure
