Aztek V6-3.4L VIN E (2001)
Cowl Moulding / Trim: Service and Repair
Air Inlet Grille Panel Replacement
Tools Required
J 38778 Door Trim Pad and Garnish Clip Remover
Removal Procedure
1. Open the hood.
2. Remove the windshield wiper arms. Refer to Windshield Wiper Arm Replacement .
3. Reposition the windshield wiper washer hose from the air inlet grille.
4. Remove the push-in retainers from the air inlet grille, using the J 38778 .
5. Remove the air inlet grille extensions from the air inlet grille at the windshield.
Pull up and out in order to release the retainers on the air inlet grille extensions.