Aztek V6-3.4L VIN E (2001)
11. Remove the front seat back cover from the seat back, by pulling the seat back cover up and over the pad.
12. Remove the hog rings from the front seat back cover to the pad.
13. Remove the front seat back cover from the pad.
Installation Procedure
1. Install the front seat back cover with alignment mark to the alignment mark on the pad.
2. Install the hog rings to the front seat back cover to the pad.
3. Install the seat back cover over the pad while alining the hook and the loop retainers.
4. Install the hook and the loop retainers, securing the front seat back cover to the pad.
5. Install the seat back cover to the front retainer at the side impact air bag.