Aztek V6-3.4L VIN E (2001)
Power Door Lock Switch: Service and Repair
POWER DOOR LOCK SWITCH REPLACEMENT
REMOVAL PROCEDURE
1. Remove the front door lock switch plate from the front door trim panel using a small flat-bladed tool at the front of the power window control
switch.
2. Disconnect the electrical connector from the front door lock control switch.
3. Remove the front door lock control switch (1) from the front door trim panel.
4. Remove the front door lock control switch from the front door lock switch plate using a small flat-bladed tool.
INSTALLATION PROCEDURE
1. Install the front door lock control switch (1) into the front door lock switch plate.
2. Connect the electrical connectors to the front door lock control switch.
3. Install the front door lock control switch plate into the front door panel pressing into place until fully seated.