Aztek V6-3.4L VIN E (2001)
5. Disconnect the electrical connector from the power seat switch.
6. Remove the power seat switch.
Installation Procedure
1. Connect the electrical connector to the power seat switch.
2. Install the power seat switch to the outer trim panel, pressing the switch into place until fully seated.
Important: The power front seat switch harness must be in the proper position for the proper installation of the outer seat cushion trim
panel.
3. Connect the power seat switch harness to the front seat support.
4. Install the outer trim panel to the front seat cushion. Refer to Front Seat Cushion Outer Trim Panel Replacement (See: Seats/Seat
Cushion/Service and Repair/Front Seat Cushion Outer Trim Panel Replacement).